I used a tight stretchy sleeveless dress to trace a pattern... it's important that if you trace another piece of clothing for a pattern, that the fabric you are about to sew with has the same properties of stretch or no stretch. I used the heavy book trick (thanks to reader Liberty for the idea!) to hold the paper real flat.
Lay your pattern on the fabric. I used pins to make sure it was tight. The fabric was doubled, with the fold at the top shoulder... that way I could cut the front and back out at the same time and the shoulders would already be connected without having to sew them.
SEW. I sewed seams up the left and right side, leaving holes for the arms, where the sleeves were to go. I also hemmed the edges in the back, front and bottom. I was too lazy to take the pins off the pattern paper, and then put them back on again, so i sewed right outside the paper line for the seam, then removed the pattern.
Step 4::::
SLEEVES::::
Why are sleeves so mysterious?? I don't think I ever do them the same twice, every time I am just shooting chance to the sky hoping a sleeve will work.
This time i took the arm hole existing and drew a sleeve that would accurately connect to it. It was a free hand experiment, with no measurements.
I cut out the arm pattern, then doubled the fabric twice to cut all the arm pieces out at once.
*
I took the scrap fabric pieces from cutting out the body pattern for the ruffle on the butt. I centered the first one and then just crinkled them up and sewed a seam across the top of each crunched, scrunched layer...
Tight and comfy and ruffley- I am going to wear this all day. :)
Everyone should where a ruffle butt dress (that they made themselves, if possible), as they hang clothes on the line. Love it!
ReplyDeleteditto Teresa! too sassy!
ReplyDeleteHey teresa!
ReplyDeleteSeriously. It's nice to dress up, even in the middle of nowhereville. :)
Esme... :) sassy!
Ditto nice ass!?
ReplyDelete